Drive Strips, Rings, and Disks

Part Number: N/A Category:

Nanomotion supplies ceramic drive strips, rings, and CCS Ceramic Coated Steel for all our motor types. Standard strips, rings and disks are available in a wide variety of sizes and shapes. Nanomotion can also provide custom drive strips/rings for different application requirements. The mating drive surface is critical to the motor’s performance. All specifications are based on using Nanomotion’s drive surfaces. Most of Nanomotion’s standard drive strips are provided with vacuum compatible, double sided tape for easy mounting. The motor user manual defines the proper mounting procedure



Drive Strips, Rings, and Disks

Standard Ceramic Strips:

  • CS-X-XX-XXX (X = Height, XX = Thickness, XXX = Length)
  • CS-10-1.5-200: For use with Edge, Edge-4X and HR1 motors
  • CS-10-3-XXX (XXX available up to 350mm): For use with HR1, HR2 and HR4 motors
  • CS-20-3-XXX (XXX available up to 500mm): For use with HR8 motors

CCS (Ceramic Coated Steel)

  • CCS-20-3-XXX : For use with HR1, HR2, HR4 and HR8 motors. Contact Nanomotion for available lengths

CR (Ceramic Rings)

  • CR (OD-ID-Height- Radial/Axial use)
  • CR-40-32-10-RA : For use with Edge, Edge-4X, HR1, and HR2 motors
  • CR-60-40-10-RA
  • CR-100-80-10-RA
  • CR-150-130-10-RA

Contact us for more information

Additional information



50 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm